Discomfort when solution flows in
- Temperature of the dialysis solution
- pH of the PD solution
- Catheter position (mechanical)
What to do:
- Check whether the solution is warm enough. Warm solution to body temperature (If you use the cycler, the cycler will warm the solution to body temperature).
- Change your position during infusion (when solution is flowing in).
- Talk to your nurse about the discomfort during therapy.
- Your nurse may assess your catheter placement.
- There are other options of peritoneal dialysis solutions that could help with your discomfort during infusion. Ask your physicians or your nurse for further information.
Dialysis solution does not flow in or out
Always contact your healthcare provider first. Below are possible causes and what to do:
|One or more clamps on the transfer set, CAPD bag lines or Automated PD systems set may be closed.||Check to make sure all the clamps are open and the frangibles are broken.|
|The tubing catheter is kinded.||Straighten out the tubing and the catheter.|
|The bag is not connected properly.||Push the luer all the way into the bag luer port.|
|The catheter, tubing or frangible is blocking by fibrin.||Gently squeeze the line or bend the frangible back and forth to loosen the fibrin and allow the fluid to pass. Complete your exchange and call your nurse to report fibrin presence.|
|Constipation.||Constipation can be prevented by eating a healthy diet, exercise and the use of prescribed bowel medicines. Change your position to see if the flow of PD solution changes. If it does not help the flow, contact your clinic.|
|Air in the solution line.||Air can block the flow of solution. Close the transfer set clamp and genlty squeeze the solution bag. This should move the air out of the line. Open the transfer set clamp and let the solution flow in.|
Drainage solution looks different
There are times when the drained fluid is not clear. There are reasons why this may happen.
|Drained fluid is cloudy.||Call your clinic immediatly. Do not wait for the next exchange. Save the fluid in the drain bag.|
|The drained fluid is dark yellow.||The PD solution may have been left in the peritoneal cavity longer than usual. Dark yellow fluid may contain more waste products than normal.|
|Drained fluid has white strands in it.||This is an indication of fibrin. If fibrin is seen several times, notify your nurse.|
|Drained fluid is pink.||This is an indication of a small amount of blood in your peritoneal cavity. Notify your nurse.|
|Drained fluid is dark red or bloody.||Contact your nurse. If the pink color gets darker or does not go away, call your clinic immediatly.|
|Heavy lifting or strenuous exercise.||Avoid heavy lifting or strenuous exercise. If the pink color gets darker or does not go away, call your clinic immediatly.|
Peritonitis is an infection caused by germs in the peritoneal cavity. Most peritonitis events are preventable if you do your exchanges as you were taught every time.
What can you do to help prevent peritonitis?
- Good hand washing and drying
- Good dialysis technique
- Good exit-site care
- Avoid constipation
Consult your nurse if you have questions or you think you have made an error in your technique.
Signs of peritonitis include:
- A cloudy bag
- Abdominal pain
- Feeling unwell
- Diarrhea (may occur)
Call your unit immediately – peritonitis will NOT go away by itself and is a serious condition.